Remove the filter from the foil package. 2. Soak the new filter in cold water for 15 minutes. 3. Insert the filter into the bottom of the reservoir by screwing it clockwise until it is fully tightened. 4. Fill the reservoir with cold water and wait for the water to filter through into the pitcher. Pour out the (black) filtered water and repeat this process twice to rinse away the loose activated carbon particles. If needed, repeat this until water is filtering perfectly clear and ready for consumption. 5. Set the indicator.
Sometimes in the alkalising process some of the particles inside the filter stick together or form ice particles. The best advice to unblock a filter is to first remove the filter from the reservoir and shake it several times, squeeze the filter at the sides quite firmly to move the media around while holding it under fresh water. Then soak it in water for 10 minutes and do a full pass through without drinking the water. We estimate around 12-15 minutes for a 2.5L full reservoir to become filtered. Also, if you are ever in a situation where you are so thirsty but the filter isn’t done, we always lift the reservoir out of the pitcher while its filtering so we can pour out the filtered water for refreshment.
The Main elements that can be traced in small amounts are as follows: Calcium Magnesium Sodium Potassium Zinc Lithium Iron Copper Cobalt Molybdenum Selenium Iodine Chromium Phosphorus.
We have conducted a test to observe the decline of pH over a given time of 9.5 hours during which the water was stored in a refrigerator. The results were as follows: pH pre filtration- 7.2 pH Post filter (immediate)- 9.6 pH 9.5 hours after filtration- 9.1 As you can see the pH stays pretty static. The molecular structure of the water is fundamentally altered for the better leading to much easier hydration physiologically.
As you can imagine, when the water in the pitcher comes up to cover the outlet at the bottom of the filter the process slows down compared to when the water is well below the filter opening at the bottom. We verify that 12-15 minutes for the reservoir (2.5L) to empty is standard. Magic takes time ? Also, if you are ever in a situation where you are so thirsty but the filter isn’t done, you can always lift the reservoir out of the pitcher while its filtering so you can pour out the filtered water for refreshment. NOTE: Do not pour water from the pitcher if there is still unfiltered water left in reservoir, this will cause spillages!
Organic material in public water supplies comes from decaying plant life, which becomes more soluble in water over time, our filter effectively removes this. Rust and lime scale will also be removed. It also removes and destroys residual disinfectants (chlorine and chloramine). Heavy metals are reduced effectively – such as lead, aluminium, mercury – and the TDS (total dissolved Solids) count will swap metals for minerals. Ion Exchange resin is effective in reducing: Nitrate Perchlorate Hexavalent Chromium (Cr VI) Colour Your water taste will be drastically improved along with the added minerals and anti-oxidant properties.
The trihalomethane element is usually a bi-product of chlorine and as such when the water Is chlorine free most of the substance is also absorbed by the filter. Activated carbon filters are quite good at filtering out the majority of oestrogen based substances but not to a degree of 100% removal.
Fluoride is very hard to remove from water and usually takes a large scale ceramic filter to do the job fully or a reverse osmosis system. 95% of the UK water utility companies do not add fluoride to the water supply, some areas of Anglian Waters supply area are injected with Sodium Fluoride which we strongly disagree with (maybe you're in their region?) . We cant guarantee that our filter removes fluoride fully. For effective fluoride removal a full Reverse osmosis system would be advised which can be costly.
The main difference we can see is initially how long the filters last for in terms of days, you would buy much less replacement filters with Kinetic. But the main selling point is that we have a much more thorough filtering process compared to brita's standard systems. From what we can see they use Carbon and in some case carbon/Ion Exchange Resin. Both of which are in our filter alongside Far infrared energy balls and added minerals. The Pence per Litre is almost exactly the same as brita when comparing replacement filters so the additional outlay to buy a Kinetic system is short lived. Our water emerges in an alkaline form which is beneficial where some say that Brita sways water toward the acid side of the scale
We recommend cleaning the jug regularly with soapy water, tap water sits in the reservoir and we all know that can get smelly over time. Never let soap get into the filter, always unscrew it and place it to the side when washing the jug. Do not use a dishwasher with the kinetic water filter, some soap and TLC are adequate.
When going on holiday the best thing to do is to keep the filter immersed in water, unscrew it and place it in the jug filled with water, keep the reservoir aside.